laber 創立了U型玻璃鋼化處理多大20' 長和建造均質處理三維玻璃烤箱專用設備。它們能保證鋼化后的均質處理產量得到及時處理。

Laber originated the tempering process for channel glass up to 20' long and constructed custom tempering ovens exclusively for tempering three dimensional channel glass. Their machinery, procedures, and experience yield dimensionally consistent glass. 

鋼化Laber  U型玻璃 經過二次鋼化爐熱處理后，使得玻璃的表面受力到達10000 PSI或更大。鋼化U型玻璃強度比普通U型玻璃強度增大3-4倍，由于它破碎后碎片小，碎片邊沿沒有鋒利的棱角，大大降低了傷害到人的可能性。

Tempered Laber channel glass is annealed channel glass that has undergone a second heat treatment in a tempering oven to strengthen the glass and raise the compression to 10,000 psi or greater. Tempered channel glass is three to four times stronger than annealed channel glass an is recognized by its break pattern- relatively small,harmless fragments. This phenomenon ,called"dicing",markediy reduces the likelihood of injury to people as there are no jagged edges or large ,sharp shards.